Williams System 3-4-6 Complete Display Set
These display set will replace the original plasma displays used on Williams System 3, System 4 and System 6 pinball machines from 1977 to 1980. (Plug & Play)
These are made in Australia & are sold pre-assembled, tested, and in a complete set of 5 pieces.
You will receive: (1 x Master with 4 x Slave Display’s)
21 stand offs, slightly shorter than the original’s, if u don’t use them they could scratch the back glass.
Making use of the existing cables in these machines, this kit replaces all 5 displays, with no need for extra wires or hacks.
These photos were taken with protective film still applied to the segments, please remove it once they are installed. Some kits may have the protective film removed for convenience.
Remember: you can now remove your high voltage fuse from the power supply, as it’s no longer required!
- Bally LED remove fuse F2 3/4 Amp
- Williams system 3-4-6 remove fuse F1 1/4 Amp ( 250mA)
Please Note: – That these displays cannot be intermixed with the original displays and must be replaced as a full set.
These are boxed, shipped and sealed in an anti-static bubble wrap with a gel bag.
These Williams Display sets fit the following Williams pins:
  System 3
• Hot Tip 11-1977
• Lucky Seven 03-1978
• World Cup 05-1978
• Contact 05-1978
• Disco Fever 08-1978
  System 4
• Pokerino 10-1978
• Phoenix 11-1978
• Flash 01-1979
• Stellar Wars 03-1979
  System 6
• Tri Zone 07-1979
• Time Warp 09-1979
• Gorgar 12-1979
• Laser Ball 12-1979
• Firepower 02-1980
• Blackout 06-1980
• Scorpion 07-1980
It is strongly recommended that our customers possess the essential technical competencies and knowledge required to appropriately install and operate our products while maintaining safety. Any damages or injuries incurred as a result of an incorrect installation or use of our products cannot be attributed to our company and we cannot be held liable for such occurrences. It is strongly recommended that customers possess the requisite technical skills and knowledge to safely and correctly install and operate our products. We would like to emphasize that we cannot be held liable for any damages or injuries that may arise due to improper installation or use of our products.
