Australian made lamp driver boards designed for your classic Bally and Stern pinball machines. This PCB is complete and ready to install, no need for any DIY assembly.
It replaces Bally® AS-2518-14, AS-2518-23, A084-91612-A000 and Stern® LDB-100 and LDA-100.
The board has been redesigned with a blend of surface mount devices & traditional through hole for the SCR’s and are easily replaced if the need ever arises. Designed to used over-rated the SCR’s giving you the peace and mind in regards to reliability.
3 test points (TP1,TP2 and TP3 ) are found to the center of the board for easy testing, with a +5v led showcasing that the board has power. Please note that this board uses the same size and length headers as the original Bally / Stern board.
The led lamp operates on direct current (dc) voltage and is therefore not recommended for alternating current (ac) voltages. In the market, there are multiple manufacturers of led lamps designed for pinball machines, some of which are offered at a lower cost. However, it is important to note that the cheaper led lamps are only compatible with dc voltage, while others are designed for ac voltages. It is strongly advise purchasing ac voltage led lamps for your pinball machine.
This recommendation is due to the fact that dc voltage led lamps when used on ac voltage will strobe at 25 times per second, this phenomenon known as “50 hertz buzz”, which is caused by the frequency of the sine wave being only on the positive side for half of the cycle. Typically, pinball machines utilize ac voltage for the general illumination (GI) lighting. Our lamp driver board and led mod’ boards are intended solely for feature lamps and will not resolve the “buzzing/strobing” problem caused by the cheaper dc voltage only led lamps.
Compatible Games:
BALLY
- 1976 Freedom
- 1977 Eight Ball
- 1977 Evel Knievel
- 1977 Lost World
- 1977 Mata Hari
- 1977 Night Rider
- 1978 Black Jack
- 1978 Bobby Orr
- 1978 Lost World
- 1978 Playboy
- 1978 Strikes & Spares
- 1978 The Six Million Dollar Man
- 1979 Dolly Parton
- 1979 Future Spa
- 1979 Harlem Globetrotters On Tour
- 1979 Kiss
- 1979 Paragon
- 1979 Star Trek
- 1979 Supersonic
- 1979 Voltan Escapes Cosmic Doom
- 1980 Fireball II
- 1980 Hotdoggin
- 1980 Mystic
- 1980 Nitro Ground_Shaker
- 1980 Rolling Stones
- 1980 Silverball Mania
- 1980 Space Invaders
- 1980 Viking
- 1980 Xenon
- 1981 Centaur
- 1981 Eight Ball Deluxe
- 1981 Elektra
- 1981 Flash Gordon
- 1981 Medusa
- 1982 Vector
- 1982 Speakeasy
- 1983 Centaur II
- 1983 Gold Ball
- 1984 Black Pyramid
- 1984 Kings of Steal
- 1984 Spy Hunter
- 1984 X’s & O’s
- 1985 Cybernaut
STERN
- 1978 Nugent
- 1979 Cosmic Princess
- 1979 Dracula
- S1979 Meteor
- 1980 Big Game
- 1980 Cheetah
- 1980 Nine Ball
- 1980 Seawitch
- 1981 Freefall
- 1981 Iron Maiden
- 1982 Orbitor
- 1977 Stingray
- 1978 Stars
- 1978 Memory Lane
- 1978 Lectronamo
- 1978 Wild Fyre
- 1978 Nugent
- 1979 Cosmic Princess
- 1979 Dracula
- 1979 Trident
- 1979 Hot Hand
- 1979 Magic
- 1979 Meteor
- 1980 Ali
- 1980 Galaxy
- 1980 Big Game
- 1980 Cheetah
- 1980 Quicksilver
- 1980 Flight 2000
- 1980 Star Gazer
- 1980 Nine Ball
- 1980 Seawitch
- 1981 Freefall
- 1981 Lightning
- 1981 Split Second
- 1981 Catacomb
- 1981 Viper
- 1981 Iron Maiden
- 1982 Dragonfist
- 1982 Orbitor
It is strongly recommended that our customers possess the essential technical competencies and knowledge required to appropriately install and operate our products while maintaining safety. Any damages or injuries incurred as a result of an incorrect installation or use of our products cannot be attributed to our company and we cannot be held liable for such occurrences. It is strongly recommended that customers possess the requisite technical skills and knowledge to safely and correctly install and operate our products. We would like to emphasize that we cannot be held liable for any damages or injuries that may arise due to improper installation or use of our products.
